T-HEXX®DRY™ External Teat Dip

T-HEXX^® DRY^™ External Teat Dip is designed for use during the dry and pre-calving period of the dairy cow. Aids in the prevention of mastitis infections caused by bacterial migration into the teat canal. T-HEXX Dry creates a film forming barrier designed to block outside environmental influences from entering the teat canal during the dry and pre-calving period. Recommended to be used at dry off and again two weeks prior to calving. Suggested application at least 3-5 days prior to calving for maximum results.

• FILM-FORMING BARRIER
  • Excellent film-forming barrier ensures the teat remains closed and sealed as long as the barrier is in tact.
• UNIFORM BARRIER
  • Insures the teat is protected from bacteria migration by assisting the natural keratin plug to protect the quarter. The coating dries and securely plugs the teat opening.
• EXCELLENT ADHESION QUALITIES
  • Provides adherence to the teat for up to seven days depending on the bedding and environment.
• ECONOMICAL
  • Low drip means less waste on the parlor floor.
• LONGEVITY ON THE TEAT
  • Depending on the bedding and environment, the barrier will stay in place for up to seven days.
• EASY TO SEE BLUE COLOR
  • As long as the product is visually covering the teat opening, it is still effective.
• WATER RESISTANT
  • Will not run off when exposed to urine, manure, rain, or other environmental conditions.

Store in a well-ventilated place.

Directions For Use 

Use in a well ventilated are. Do not pour unused product back into original container. Keep container tightly closed when not in use. Apply with a disposable 3oz. paper cup.

At Dry Off – 
At last milking prior to dry off, milk out cow completely. Infuse dry cow antibiotic into clean, dry teat according to label instructions.
Dip entire length of teat into T-HEXX DRY Teat Dip. For maximum protection, a second application may be applied after the first
coating is dry.

10 Days Prior To Calving – 
Clean teat thoroughly and wipe with dry towel. Dip entire length of teat into T-HEXX DRY Teat Dip. Product should remain on teat 3 – 7 days. Observe daily and re-dip if sealant is removed prior to calving. After calving, peel off any remaining teat sealant prior to milking.